ET5000-SUPERLIFT

Versatile platform full of unique solutions

ESSEL Towing

MODEL ET5000 - SUPERLIFT

The premium towing platform with a load-bearing capacity of 5 tons designed for vehicle recovery, transportation, and towing.

It is equipped with a split platform with a folding rear section, which allows for a more favorable approach angle to be able to load vehicles with a low chassis height as well.

Manufactured with a sense for detail. You can rely.

UNDERLIFT WITH A SPECIAL FUNCTION

The underlift of the superstructure commonly allows towing of the towed vehicle and has an additional special function, which is lifting the towing equipment above the platform level. The telescopic extension arm of the towing device can be raised to a height of approximately 2 meters above the road level. At the end of the arm, a special adapter with a directional pulley is attached for guiding the towing cable of the winch located on the platform. This enables the extraction and recovery of a vehicle from gorges, ditches, fjords, and other places with steep descents below the level of the surrounding terrain.

REAR SUPPORT LEGS

The ET5000 SUPERLIFT utilizes rear support legs with specially designed kinematics that stabilize the carrier vehicle during handling of the towed vehicle. In addition to their standard stabilizing function, their rotational movement allows raising the rear axle of the carrier vehicle to a height that enables the installation of snow chains on the wheels even in challenging weather conditions without the need to move the vehicle.

5000kg

Loading capacity of platform

1500kg

Loading capacity of towing device at 1,2 m

3150kg

Weight

Standard equipment

Chassis

  • Axel 2

  • Wheel base approx.4,2 m

  • Equipped with power take off (PTO) engine / gear

  • Total vehicle weight up to 11,99 t

  • Wheels 17,5 “

Subframe

  • Made of high tensile steel

  • Hot-dip galvanised

  • Fixed to the truck frame acc. to manufacturer ´s specification

Tilting frame

  • Made of high-strength steel

  • Hot-dip galvanized

  • Tilting mechanism operated by two hydraulic cylinders

  • Maximum tilt angle: 15°

SCC - Second car carrier

  • Extendable by 1200 mm

  • Load capacity at full extension: 1.5 tons

  • Can be used as a crane arm

  • Hot-dip galvanized

Platform

  • Length: 6000 mm

  • Width: 2450 mm

  • Folding rear section

  • Minimum vehicle approach angle: 7°

  • Hot-dip galvanized

  • Anti-slip surface

  • Mounting holes along the entire platform

  • Wheel chocks

  • 4 loading rollers

  • Hydraulic displacement of the winch: 860 mm

Flyer

  • High flyer

  • Full front wall

  • Equipped with accessory hooks

  • Tool storage compartment

Winches

  • On the platform:

    VIME EPH 3600, rope diameter 10 mm, rope length 30 m

  • Underneath the platform with a directional pulley at the back:

    VIME EPH 3600, rope diameter 10 mm, rope length 30 m

Hydraulic system

  • Oil tank, geometric volume of 80 liters

  • Working volume of the hydraulic fluid: 60 liters

  • Working pressure in the hydraulic system: 18 MPa

  • Oil flow rate of 25 liters per minute at an engine speed of 650 RPM

  • Distributor 9 sections, with custom made hoses located in the illuminated stainless steel box

Electric system

  • Custom-made electrical box: ESSELTRONIC

  • Remote radio control

  • 8 working lights

  • Orange outline lights on the side of the platform and the vehicle

  • 4 strobe lights at the front, 2 on the beacon bar, 2 at the rear

  • Light bar on the vehicle cabin and the beacon bar

  • Combination lights on the beacon bar

  • Light control from the vehicle cabin and the remote control

Accessories

  • Two stainless steel toolboxes

  • Broom and shovel holder

  • ISO50 3.5-ton towing ball

  • Directional pulley on SCC (allows for recovery from ditches)

  • Rear directional pulley

  • Side directional pulley on the platform

  • Snow chain holder

  • Compressed air hose winch located in a box

Get in touch

Are you interested in ordering, or do you simply need additional information? Please feel free to contact us. Just fill out the form and we will promptly get back to you.